Wireless Door Lock Control System

To use the wireless door lock control system, first push the main switch on the dashboard to activate the system. Then the remote control switch (transmitter) built into the master key can be pushed to lock or release all doors from outside the vehicle.

NOTE: If any door is not securely closed or the key is in the ignition switch, locking cannot be performed by the remote control switch (transmitter).

The operational range of the wireless remote control is about 3 feet from the outside handle of the driver's door. The effective range may vary with different conditions.

You have 30 seconds to open a door after using the remote unlock feature. If a door is not opened by then, all doors will automatically relock.

When any door is unlocked, pushing the remote control switch locks all the doors. To unlock the doors, push the switch again.

Continued pushing of the remote control switch will not cause repeated locking and unlocking of the doors. To reverse the operation performed by the remote control switch, the switch must first be released, then pressed again.

When pushing the remote control switch does not actuate the doors, and you have checked that the wireless remote main switchis is on and checked the battery in the master key, there is a fault in the system.