LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1992 >> LS 400 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector (Es300) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cold Start Injector (Es300): Installation

  1. Install injector with a new gasket, and tighten to specification. See TORQUE SPECIFICATIONS  table.
  2. Using 2 new gaskets, connect injector pipe with union bolt and tighten to specification. See TORQUE SPECIFICATIONS  table. Connect cold start injector connector. Connect cable to negative battery terminal. Check for fuel leaks.
scientia non olet · About LEMON Manuals