Setting Driving Positions
- Adjust the driver's seat, tilt and telescopic steering as well as the outside rear view mirrors to the desired position. See Fig 1.
- While pushing the "SET" button, push button "1" or "2" until the signal beeps. See Fig 1.
The beep sound means that the positions are recorded in the computer's memory. By repeating these 2 steps and pressing the remaining, the driving position for another driver can be recorded. To set a new memorized position, select the desired position and perform step 2. The previous memory will be erased and the new position will be set.
To make only slight changes to an already memorized position, the easiest way is to first activate the memorized position, then make the desired changes and perform step 2.