EGR System
- Remove filters from EGR vacuum modulator. Using compressed air, clean filters. Install filters with coarse side facing outward.
- Connect tachometer to terminal IG of check connector. Using Jumper Wire (SST 09843-18020), jump check connector terminals TE1 and E1. Operate engine at 3500 RPM with transmission in Neutral. Remove jumper wire. With coolant temperature at or below 113°F (45°C), no increase in engine RPM should be noted. With coolant temperature at least 122°F (50°C), engine RPM should increase.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002