LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1993 >> SC 300 Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector >> Installation (ES300)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (ES300)

Install injector with a new gasket, and tighten to specification. See TORQUE SPECIFICATIONS TABLE  at the end of this article. Using 2 new gaskets, connect injector pipe with union bolt and tighten to specification. Connect cold start injector connector. Reconnect negative battery cable. Check for fuel leaks.

scientia non olet · About LEMON Manuals