LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1993 >> SC 400 >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Component Testing >> Hazard Warning Switch Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hazard Warning Switch Test

  1. Remove hazard warning switch. See HAZARD WARNING SWITCH  under REMOVAL & INSTALLATION. Place switch in OFF position. Using an ohmmeter, check for continuity between terminals No. 7 and 10. See Fig 1. If continuity exists, go to next step. If continuity does not exist, replace switch.
  2. Place switch in ON position. Continuity should exist between terminals No. 7 and 8, terminals No. 5, 6 and 9, and terminals No. 2 and 3. If continuity does not exist as specified, replace switch.
Fig 1: Hazard Warning Switch & Connector Terminal ID
G92B01199Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals