LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1993 >> SC 400 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Cold Start Injector >> Installation (SC400)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (SC400)

  1. Install cold start injector with new gasket, and tighten to specification. See TORQUE SPECIFICATIONS TABLE  at the end of this article. Install cold start injector tube and banjo bolt with new gaskets, and tighten to specification. Install air intake chamber with new gaskets, and tighten to specification.
  2. To complete installation, reverse removal procedure. Fill and bleed cooling system. Start engine and check for fuel and coolant leaks.
scientia non olet · About LEMON Manuals