Throttle Position Sensor: Specifications

With 0 mm (0 in) clearance between lever and stop screw
Resistance between terminals VTA and E2 0.28 - 6.4 k ohms

With 0.35 mm (0.014 in) clearance between lever and stop screw
Resistance between terminals IDL and E2 0.5 k ohms or less

With 0.70 mm (0.28 in) clearance between lever and stop screw
Resistance between terminals IDL and E2 Infinity

With wide open throttle
Resistance between terminals VTA and E2 2.0 and 11.6 k ohms

Always
Resistance between terminals VC and E2 2.7 and 7.7 k ohms