LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1994 >> SC 400 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Self-Diagnostics >> Retrieving Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retrieving Codes

  1. Turn ignition on. Turn cruise main switch on. If CRUISE indicator light comes on, leave ignition on and go to next step. If CRUISE indicator light does not come on, check cruise indicator light circuit. See PROCEDURE NO. 12 under CIRCUIT TESTING .
  2. To retrieve codes, turn cruise main switch off. Connect Jumper Wire (09843-18020) between terminals Tc and E1 of Data Link Connector (DLC) No. 2, located under left side of instrument panel. See Figure. Observe CRUISE indicator light to see if any codes are displayed. See Figure.
    • Light Does Not Come On: See PROCEDURE NO. 11 under CIRCUIT TESTING .
    • Light Flashes Steadily: No codes set ("normal" code).
    • Light Flashes Codes(s): Go to appropriate PROCEDURE NO. under CIRCUIT TESTING . When finished, disconnect jumper wire and turn ignition off.
scientia non olet · About LEMON Manuals