Power Seat Switch Test (Driver's Side)
- Disconnect switch connector. Leave switch in neutral position. At switch connector, check for continuity between terminal No. 14 and all other terminals. See Figure. If there is continuity, replace switch.
- If there is no continuity, check for continuity between specified terminals of switch connector, with switch in specified position. See appropriate POWER SEAT SWITCH TEST table. If there is no continuity, replace switch. If there is continuity, switch is okay.
POWER SEAT SWITCH TEST (DRIVER'S SIDE)
| Switch Position |
Terminals No. |
| Slide |
| Forward |
14 & 1 |
| Backward |
14 & 2 |
| Front Up/Down |
| Up |
14 & 5 |
| Down |
14 & 6 |
| Rear Up/Down |
| Up |
14 & 9 |
| Down |
14 & 8 |
| Recline |
| Forward |
14 & 4 |
| Backward |
14 & 3 |
| Lumbar Support |
| Forward (Out) |
7 & 11; 10 & 12 |
| Off |
10 & 12; 11 & 12 |
| Backward (In) |
7 & 10; 11 & 12 |