Fuel System Pressure Release

WARNING: This page is about a different car, the 1995 Lexus LS 400. However, it is still accessible from the selected car via links, so may be relevant.

Remove trunk trim panel and unplug fuel pump connector. Start and run engine until it stops. Wrap fuel line connection at fuel rail with shop towel to catch any spilled fuel. Loosen flare nut or banjo bolt enough to relieve any remaining fuel pressure. Tighten flare nut or banjo bolt.

NOTE: Data Link Connector (DLC) No. 1 is located:

Near left front corner of air intake chamber.