LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> GS 300 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Sensor Rotor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor Rotor: Installation

Install speed sensor rotor. Install NEW nut on axle hub, and tighten to specification. See TORQUE SPECIFICATIONS . Stake axle nut using a punch. Install grease cap.

NOTE: ABS speed sensor rotor is mounted on each rear axle shaft outboard joint.


  1. Install ABS speed sensor rotor onto axle shaft. During installation, use care to avoid damaging CV joint boots, ABS speed sensor rotor on axle shaft and oil seal in axle hub. Insert outboard CV joint side into axle hub assembly. Align reference marks made during removal, and install axle shaft on differential.
  2. Apply a light coat of engine oil to 6 axle shaft bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
  3. Install rear wheels, and lower vehicle. Turn air suspension switch on (if equipped). Tighten wheel lug nuts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals