Sub-Throttle Position Sensor (W/TRAC)

Condition Resistance

With 0 mm (0 in) between throttle lever and stop screw
Between terminals VTA and E2 0.34 - 6.3 Ohms

With 0.30 mm (0.012 in) between throttle lever and stop screw
Between terminals IDL2 and E2 0.5 k Ohms or less

With 0.50 mm (0.020 in) between throttle lever and stop screw
Between terminals IDL2 and E2 infinite

Throttle valve fully open
Between terminals VTA2 and E2 2.4 - 11.2 k Ohms

Any throttle position
Between terminals VC and E2 3.1 - 7.2 k Ohms