Ignition Coil Resistance
WARNING: This page is about a different car, the 1995 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect electrical connector and distributor wire from ignition coil. To measure primary resistance, measure resistance between terminals of ignition coil electrical connector. See COMPONENT LOCATIONS under INTRODUCTION. To measure secondary resistance, measure resistance between Black/Orange wire terminal of ignition coil electrical connector and coil secondary tower. If resistance is not as specified, replace ignition coil. See IGNITION COIL RESISTANCE table.
IGNITION COIL RESISTANCE - Ohms
| Application | Primary | Secondary | ||||
|---|---|---|---|---|---|---|
| Cold (1) | .21-.33 | 6400-11,100 | ||||
| Hot (2) | .27-.39 | 8200-13,000 | ||||
|
||||||