LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1995 >> SC 400 >> Repair and Diagnosis >> Body & Frame >> Seats - Power W/Memory >> Circuit Testing >> Ignition Switch Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch Circuit Test

NOTE: If driver's power seat ECU senses that the ignition is not turned on, it prevents seats from being operated.
  1. At driver's seat, remove bolts for front vertical adjuster. Lift front end of seat cushion slightly for access to driver's power seat ECU (DO NOT  lift too far; harness clamp may come loose). Remove driver's power seat ECU, but leave wiring harness connectors attached. Measure voltage between chassis ground and terminal No. 7 of driver's power seat ECU connector "A". See Figure.
  2. With ignition on, battery voltage should be present. With ignition off, no voltage should be present. If voltage is as specified, go to next item listed under TROUBLE SHOOTING . If voltage is not as specified, check ECU-IG fuse. If ECU-IG fuse is blown, check for short to ground. If ECU-IG fuse is okay, repair circuit between driver's power seat ECU and battery.
scientia non olet · About LEMON Manuals