Power Seat Switch Test (Driver's Side)
Disconnect power seat switch connector. Check for continuity between specified terminals of switch connector, with switch in specified position. See appropriate POWER SEAT SWITCH TEST table. Continuity should exist between terminals being checked. Replace switch as necessary.
POWER SEAT SWITCH TEST (DRIVER'S SIDE)
| Switch Position | (1) Terminals No. | |||
|---|---|---|---|---|
| Slide | ||||
| Forward | 14 & 1 | |||
| Backward | 14 & 2 | |||
| Front Up/Down | ||||
| Up | 14 & 5 | |||
| Down | 14 & 6 | |||
| Rear Up/Down | ||||
| Up | 14 & 9 | |||
| Down | 14 & 8 | |||
| Recline | ||||
| Forward | 14 & 4 | |||
| Backward | 14 & 3 | |||
|
||||