Fuel Rails & Injectors: Installation
WARNING: This page is about a different car, the 1995 Lexus SC 300. However, it is still accessible from the selected car via links, so may be relevant.
- Install NEW "O" rings and grommets on injectors. Apply a light coat of oil to fuel injector "O" rings. Using a twisting motion, push injectors onto fuel rail. Ensure injectors are fully seated in fuel rail.
- Install insulators into injector holes in intake manifold. Install injectors together with fuel rail, and lightly tighten nuts. Ensure injectors rotate smoothly left and right.
- If injectors do not rotate smoothly, recheck "O" ring installation. To complete installation, reverse removal procedure. Tighten fuel rail mounting bolts to specification. See TORQUE SPECIFICATIONS. Fill cooling system. Start engine and inspect for fuel and coolant leaks.