Rear Switches

Remove rear window switch to be tested. Connect a jumper wire between positive battery terminal and terminal No. 1 of switch. See Fig 1. Connect another jumper wire between negative battery terminal and terminal No. 4 of switch.
Check for continuity between specified terminals of switch. See REAR SWITCH CONTINUITY TEST TABLE . If continuity is not as specified, replace window switch.

REAR SWITCH CONTINUITY TEST

Position

Terminals No.

Off (Neutral)

⁽¹⁾

3 & 4

Down

2 & 4

⁽¹⁾	Continuity should not exist between any terminals.

Fig 1: Identifying Passenger's Switch Terminals