LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1996 >> LS 400 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostic System >> Clearing Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clearing Codes

  1. Disconnect short pin from Data Link Connector No. 1 (DLC1). See Figure. DLC1 is located in engine compartment, next to oil fill cap. Using a jumper wire, connect terminals Tc and E1 of Data Link Connector No. 1 (DLC1) or Data Link Connector No. 2 (DLC2). See Figure. DLC2 is located under left side of instrument panel, near kick panel.
  2. Turn ignition on. With vehicle stopped, depress brake pedal 8 or more times in 3 seconds. Ensure ABS light blinks once every .25 second (normal code). Codes are now erased. Remove jumper wire. Connect short pin to DLC1. Ensure ABS light goes out after 3 seconds.
NOTE: ECU-B fuse removal will clear DTC's, but other memory systems will also be cleared.
scientia non olet · About LEMON Manuals