Throttle Position Sensor: Adjustments

THROTTLE POSITION SENSOR ADJUSTMENT

If necessary, adjust throttle position sensor.





- Loosen the 2 set screws of the sensor.
- Apply vacuum to the throttle opener.
- Insert a 0.62 mm (0.024 in.) feeler gauge between the throttle stop screw and stop lever.





- Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.





- Gradually turn the sensor clockwise until the ohmmeter deflects. and secure it with the 2 set screws.





- Recheck the continuity between terminals IDL and E2.