Alternator & Regulator: Specifications
TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lb |
| Bearing retainer x Drive end frame | 3.0 | 31 | 27 in.lb |
| Rectifier end frame x Drive end frame | 4.5 | 46 | 40 in.lb |
| Generator pulley x Rotor | 110 | 1,125 | 81 |
| Rectifier holder x Lead wire on rectifier end frame | 2.9 | 30 | 26 in.lb |
| Voltage regulator x Rectifier end frame | 2.0 | 20 | 18 in.lb |
| Voltage regulator, Brush holder x Rectifier holder | 2.0 | 20 | 18 in.lb |
| Brush holder x Voltage regulator | 2.0 | 20 | 18 in.lb |
| Rear end cover x Rectifier holder | 4.4 | 45 | 39 in.lb |
| Rectifier plate x Rectifier holder | 3.8 | 39 | 34 in.lb |
| Terminal insulator x Rectifier holder | 4.1 | 42 | 36 in.lb |
| Drive belt adjusting bar x Timing chain cover | 21 | 210 | 15 |
| Generator x Generator bracket | 59 | 600 | 43 |
| Drive belt adjusting bar x Generator | 21 | 210 | 15 |