Field Frame (Field Coil)

Verify continuity between lead wire and field coil brush lead. If continuity is not present, replace field coil. Verify there is no continuity between field coil end and field frame. If continuity exists, replace or repair field frame.

Fig 1: Testing Starter Solenoid Pull-In Coil Test

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Testing Starter Solenoid Hold-In Coil Test

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 3: Testing Starter Solenoid Drive Pinion Return Test

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002