Section 1 (Engine Controls - Specifications): Capacities
WARNING: This page is about a different car, the 1995 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Some transaxles require that differential be filled separately from transaxle. A special amount of lubricant is required for differential. See FLUID CAPACITIES
table.
FLUID CAPACITIES
| Application | (1) Quantity | ||||
|---|---|---|---|---|---|
| Crankcase (Includes Filter) | 7.8 Qts. (7.4L) | ||||
| Cooling System (Includes Heater) | |||||
| With Front Heater Only | 13.2 Qts. (12.5L) | ||||
| With Front & Rear Heater | 14.2 Qts. (13.4L) | ||||
| Automatic Transmission (Dexron-II) | |||||
| Dry Refill | 11.6 Qts. (11.0L) | ||||
| Drain & Refill | 2.0 Qts. (1.9L) | ||||
| Differential (SAE 80W-90/API GL-5) | |||||
| Front Axle | |||||
| With Front & Rear Differential Lock | 2.8 Qts. (2.7L) | ||||
| Without Front & Rear Differential Lock | 3.0 Qts. (2.8L) | ||||
| Rear Axle | 3.4 Qts. (3.2L) | ||||
| Transfer Case (SAE 75W-90/API GL-5) | 1.8 Qts. (1.7L) | ||||
|
|||||