Throttle Position Sensor: Specifications
| Measure Between Terminals | Clearance Note: Between stop screw and lever. | Resistance | |
| Main TPS Sensor - Clearance / Resistance | VTA1 - E2 | 0 Millimeter (mm) | 0.34-6.3 Kilo Ohms (K ohms) |
| IDL1 - E2 | 0.40 Millimeter (mm) | 0.5 Kilo Ohms (K ohms) Note:Or Less | |
| IDL1 - E2 | 0.65 Millimeter (mm) | Infinity | |
| VTA1 - E2 | Fully Open | 2.4-11.2 Kilo Ohms (K ohms) | |
| VC - E2 | Fully Open | 3.1-7.2 Kilo Ohms (K ohms) | |
| Sub TPS Sensor - Clearance / Resistance | VTA2 - E2 | 0 Millimeter (mm) | 0.34-6.3 Kilo Ohms (K ohms) |
| IDL2 - E2 | 0.40 Millimeter (mm) | 0.5 Kilo Ohms (K ohms) Note: Or Less | |
| IDL2 - E2 | 0.65 Millimeter (mm) | Infinity | |
| VTA2 - E2 | Fully Open | 2.4-11.2 Kilo Ohms (K ohms) | |
| VC - E2 | Fully Open | 3.1-7.2 Kilo Ohms (K ohms) |