Test 26: SRS Warning Light Problem

Check ECU-B fuse. Repair as needed. Disconnect instrument panel connector "D". Check voltage at connector "D" terminal No. 8. If battery voltage does not exist, repair open circuit between connector "D" terminal No. 8 and ECU-B fuse. If battery voltage exists, check continuity between connector "D" terminal No. 8 and connector "D" terminal No. 9. If continuity exists, check wiring between instrument panel and center airbag sensor assembly. If wiring is okay, replace center airbag sensor assembly. If continuity does not exist, check light bulb. Replace as needed. If light bulb is okay, replace circuit plate and retest. If problem still exists, replace instrument panel computer.