Additional Sub Key Programming
NOTE:
This is done for an additional sub key.
- Perform this step within 15 seconds. Ensure all doors are closed and key is not in ignition. Insert master key in ignition, then turn ignition from LOCK to ON 4 times, ending with ignition ON.
- Perform this step within 20 seconds of completing last step. Open and close driver's door 5 times. Remove master key from ignition.
- Perform this step within 10 seconds of completing last step. Insert sub key in ignition.
- Perform this step within 10 seconds of completing last step. Turn ignition on for 60 seconds or more. Remove key from ignition.
- If registering another sub key, remove registered sub key and insert new sub key within 10 seconds. Turn ignition on for 60 seconds or more. Remove key from ignition.
- To end programming, open and close driver's door.