Rear Switches

Remove rear window switch to be tested. Using 2 jumper wires, connect battery positive to switch terminal No. 1 and battery negative to switch terminal No. 4. See Fig 1.
Check for continuity between specified terminals of switch. See REAR SWITCH CONTINUITY TEST table. If continuity is not as specified, replace window switch.

REAR SWITCH CONTINUITY TEST

Position

Terminals No.

Off (Neutral)

⁽¹⁾

3 & 4

Down

2 & 4

⁽¹⁾	Continuity should not exist between any terminals.

Fig 1: Identifying Passenger's Switch Terminals