LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1997 >> SC 400 >> Repair and Diagnosis >> Body & Frame >> Seats - Power W/Memory >> Circuit Testing >> Ecu Power Source Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ecu Power Source Circuit Test

NOTE: Use this procedure to check for problems in circuit between DOME fuse and power seat ECU.
  1. At driver's seat, remove bolts for front vertical adjuster. Lift front end of seat cushion slightly for access to driver's seat ECU (do not lift too far; harness clamp may come loose). Remove driver's seat ECU, but leave wiring harness connectors attached.
  2. Measure voltage (backprobe) between terminals No. 7 and 18 at drivers seat ECU connector "B". See Figure. If battery voltage is present, return to TROUBLE SHOOTING .
  3. If battery voltage is not present, measure resistance between ground and driver's seat ECU, connector "B", terminal No. 18. If resistance is one ohm or more, repair open ground circuit. If resistance is less than one ohm, check DOME fuse.
  4. If DOME fuse is blown, locate and repair short to ground in circuit between DOME fuse and driver's seat ECU. If fuse is okay, repair open circuit between battery and driver's seat ECU. See WIRING DIAGRAMS .
scientia non olet · About LEMON Manuals