Vehicle Speed Sensor (VSS) No. 1
- If speedometer operates, VSS No. 1 is okay. If speedometer does not operate, disconnect VSS No. 1 connector. Remove VSS No. 1 from transaxle/transmission. Connect battery positive lead to terminal No. 1 and negative lead to terminal No. 2. See Fig 1.
- While rotating gear, measure voltage between terminals No. 2 (negative lead) and No. 3 (positive lead). Replace VSS No. 1 if voltage does not alternate between zero and 12 volts, 4 times per revolution.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002