Section 14 (Generator & Regulator): Specifications
WARNING: This page is about a different car, the 1997 Lexus SC 300. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lb |
| Bearing retainer x Drive end frame | 3.0 | 31 | 27 in.lb |
| Rectifier end frame without wire clip x Drive end frame | 4.5 | 46 | 40 in.lb |
| Generator pulley x Rotor | 110.5 | 1,125 | 81 |
| Rectifier holder x Lead wire on rectifier end frame | 2.9 | 30 | 26 in lb |
| Voltage regulator x Rectifier end frame | 1.96 | 20 | 17 in.lb |
| Voltage regulator x Rectifier holder | 1.96 | 20 | 17 in.lb |
| Brush holder x Rectifier holder | 1.96 | 20 | 17 in.lb |
| Brush holder x Voltage regulator | 1.96 | 20 | 17 in.lb |
| Rear end cover x Rectifier holder | 4.4 | 45 | 39 in.lb |
| Plate terminal x Rectifier holder | 3.8 | 39 | 34 in.lb |
| Terminal insulator x Rectifier holder | 6.5 | 66 | 58 in.lb |
| Generator x Cylinder block | 39 | 400 | 29 |