LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1998 >> ES 300 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Engine Immobilizer System >> Programming >> Additional Master Key Programming >> Using Brake & Accelerator Pedal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Brake & Accelerator Pedal

  1. Insert registered master key in ignition.
  2. Perform this step within 15 seconds of completing last step. Depress and release accelerator pedal 5 times.
  3. Perform this step within 20 seconds of completing last step. Depress and release brake pedal 6 times. Remove master key from ignition.
  4. Perform this step within 10 seconds of completing last step. Insert new key to be registered in ignition.
  5. Perform this step within 10 seconds of completing last step. Depress and release accelerator pedal one time. Security indicator should flash.
  6. After one minute, additional master key is registered. Security indicator should turn off. If programming additional keys, repeat process starting with step  4. If additional keys do not need programming, remove master key from ignition. Depress and release brake pedal at least once after security indicator has been out for 10 seconds to complete registration mode.
scientia non olet · About LEMON Manuals