Ignition Switch Circuit
Check voltage (backprobe) 8-pin ignition switch harness connector with ignition switch in specified position. See IGNITION SWITCH VOLTAGE table. If voltage is not as specified, repair as necessary. See POWER DISTRIBUTION article in WIRING DIAGRAMS.
IGNITION SWITCH VOLTAGE
| Terminal No. (Wire Color) | Switch Position | Voltage |
|---|---|---|
| 2 (White/Blue) | All | 10-14 |
| 3 (White/Green) | ACC Or ON | 10-14 |
| 4 (White) | ON | 10-14 |
| 6 (Black) | ON | 10-14 |
| 7 (Black/White) | All | 10-14 |
| 8 (Black/Red) | START | 10-14 |