Master Switch Circuit
Disconnect master switch harness connector. Using DVOM, check circuit values at master switch harness connector. See Fig 1. Ensure circuit values are as specified. See MASTER SWITCH CIRCUIT VALUES table. If circuit values are not as specified, repair as necessary. See WIRING DIAGRAMS .
MASTER SWITCH CIRCUIT VALUES
| Tester Connection | Condition | Circuit Value | ||
|---|---|---|---|---|
| 1 & Ground | Constant | Continuity | ||
| 7 & Ground | Ignition Switch In LOCK Or ACC Position | (1) No Voltage | ||
| 7 & Ground | Ignition Switch In ON Position | Battery Voltage | ||
|
||||