Passenger's Switch
Remove passenger's switch in question. Using DVOM, check for continuity between passenger's switch terminals. See Fig 1. Ensure continuity is as specified between appropriate terminals in indicated switch positions. See PASSENGER'S SWITCH CONTINUITY SPECIFICATIONS table. If continuity is not as specified, replace passenger's switch.
PASSENGER'S SWITCH CONTINUITY SPECIFICATIONS
| Switch Position | Test Between Terminals No. | Continuity | |
|---|---|---|---|
| Right Front Switch | |||
| UP (Manual) | 3, 6 | Yes | |
| UP (Auto) | 3, 6; 3, 5 | Yes | |
| OFF (Neutral) | Any | No | |
| DOWN (Auto) | 3, 4; 3, 5 | Yes | |
| DOWN (Manual) | 3, 4 | Yes | |
| Rear Switches | |||
| UP | 1, 3; 2, 5 | Yes | |
| OFF | 1, 3; 2, 4 | Yes | |
| DOWN | 2, 4; 3, 5 | Yes | |