Programming Passive Mode On

Remove ignition key from key cylinder. Ensure all doors, engine hood and luggage compartment door are closed and unlocked. Perform all of the following methods within 30 seconds:

• Lock or unlock any door with key or remote keyless entry system.
• Open driver door.
• Lock and unlock driver door lock knob 3 times.

After performing method listed above, system should start force lock after 2 seconds. Perform all of the following methods within 20 seconds:

• Unlock driver door lock knob.
• Close and open driver door 4 times.
• Lock and unlock driver door lock knob.

After performing method listed above, system should start force lock after 2 seconds. Passive mode should now be on.