Throttle Opener: Es300
- Start engine and warm engine to normal operating temperature. Shut engine off.
- Connect scan tool to data link connector No. 3. See Figure. Scan tool is used to read engine RPM. Apply parking brake.
- Place transaxle in Neutral. Start engine and maintain engine at 2500 RPM for 90 seconds and then allow engine to idle. Ensure idle speed is 650-750 RPM.
- Shut engine off. Disconnect and plug vacuum hose at throttle opener near throttle body. See Fig 1. Start engine and note engine speed. Engine speed should be 1100-1700 RPM.
- If engine speed is not within specification, replace throttle body. Shut engine off. Reinstall vacuum hose on throttle opener. Start engine and ensure engine returns to proper idle speed.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002