Rear Quarter Power Window Switch Continuity Test
Using an ohmmeter, check continuity between rear quarter power window switch specified terminals in specified position. See REAR QUARTER POWER WINDOW SWITCH CONTINUITY TEST table. See Figure. If continuity is not present at specified terminals, replace rear quarter power window switch.
REAR QUARTER POWER WINDOW SWITCH CONTINUITY TEST
| Switch Position | (1) Terminal Numbers | ||
|---|---|---|---|
| CLOSE | 3 & 6; 4 & 5 | ||
| OFF | - | ||
| OPEN | 3 & 4; 5 & 6 | ||
| Illumination Circuit | 1 & 2 | ||
|
|||