LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 1999 >> RX 300 AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems >> Component Tests >> Door Key Lock & Unlock Switch >> Back Door
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back Door

  1. Remove door trim panel and service hole cover. Disconnect 3-pin electrical connector from door key lock and unlock switch. Connect ohmmeter between terminals No. 1 (White/Black wire) and No. 2 (Blue/White wire) of door key lock and unlock switch connector (component side). See WIRING DIAGRAMS . When door is locked, continuity should exist. When door is unlocked, continuity should not exist.
  2. Connect ohmmeter between terminals No. 1 (White/Black wire) and No. 3 (Light Green/Red wire) of door key lock and unlock switch connector (component side). When door is unlocked, continuity should exist. When door is locked, continuity should not exist. If continuity is not as specified, replace door key lock and unlock switch and retest system operation.
scientia non olet · About LEMON Manuals