Specifications Index
SC300 & SC400 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||||
|---|---|---|---|---|---|
| Air Conditioning | |||||
| Service | SPECIFICATIONS | ||||
| Torque | TORQUE SPECIFICATIONS | ||||
| Axle Shaft/Bearing Lock Nut/Drive Axle Nut | |||||
| Front | |||||
| Axle Hub Lock Nut | 147 Ft.lbs (199 N.m) | ||||
| Rear | |||||
| Drive Axle Lock Nut | 213 Ft.lbs (289 N.m) | ||||
| Battery | NA | ||||
| Brakes | |||||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||||
| Torque | TORQUE SPECIFICATIONS | ||||
| Charging | |||||
| Generator | |||||
| SC300 & SC400 | ON-VEHICLE TESTING | ||||
| Torque | |||||
| SC300 & SC400 | TORQUE SPECIFICATIONS | ||||
| Drive Belts | |||||
| Adjustment | BELT ADJUSTMENT | ||||
| Belt Routing | ADJUSTMENTS | ||||
| SC300 | NA | ||||
| SC400 | ADJUSTMENTS | ||||
| Engine Cooling | |||||
| General Service Specifications | |||||
| SC300 & SC400 | COOLING SYSTEM SPECIFICATIONS | ||||
| Radiator Cap Pressure | |||||
| SC300 | 13.5-14.9 psi (Minimum opening pressure is 8.5 psi) |
||||
| SC400 | 13.5-17.8 psi (Minimum opening pressure is 11.4 psi) |
||||
| Thermostat R & I | |||||
| SC300 | THERMOSTAT | ||||
| SC400 | THERMOSTAT | ||||
| Water Pump R & I | |||||
| SC300 | WATER PUMP | ||||
| SC400 | WATER PUMP | ||||
| Engine Mechanical | |||||
| Compression | |||||
| SC300 & SC400 | ENGINE COMPRESSION | ||||
| Oil Pressure | |||||
| SC300 | |||||
| At Idle Speed | 7.0 psi (0.5 kg/cm2 ) or more | ||||
| At 3,000 RPM | 47 psi (3.3 kg/cm2 ) or more | ||||
| SC400 | |||||
| At Idle Speed | 4.3 psi (0.3 kg/cm2 ) or more | ||||
| At 3,000 RPM | 43-85 psi (3.0-5.5 kg/cm2 ) | ||||
| Overhaul | |||||
| SC300 | ENGINE SPECIFICATIONS | ||||
| SC400 | ENGINE SPECIFICATIONS | ||||
| Torque | |||||
| SC300 | TORQUE SPECIFICATIONS | ||||
| SC400 | TORQUE SPECIFICATIONS | ||||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||||
| Flywheel/Flex Plate (Drive Plate) Torque | |||||
| Drive Plate-To-Crankshaft | |||||
| SC300 | 61 Ft.lbs (83 N.m) | ||||
| SC400 | 72 Ft.lbs (98 N.m) | ||||
| Fuel System | |||||
| Pressure Specification | |||||
| SC300 & SC400 | 44-50 psi (3.1-3.5 kg/cm2 ) | ||||
| Fuel Pressure Test Procedure | |||||
| SC300 | GS300 & SC300 | ||||
| SC400 | GS400, LS400 & SC400 | ||||
| Fuel Filter | |||||
| SC300 & SC400 | FUEL PUMP | ||||
| Ignition | |||||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||||
| Ignition Wires (Routing) | NA | ||||
| Spark Plugs | |||||
| SC300 | |||||
| Type | NGK No. BKR5EKPB11 DENSO No. PK16TR11 |
||||
| Gap | .043 In. (1.10 mm) | ||||
| Torque | 13 Ft. lbs (18 N.m) | ||||
| SC400 | |||||
| Type | NGK No. IFR6A11 DENSO No. SK20R11 |
||||
| Gap | .043 In. (1.10 mm) | ||||
| Torque | 13 Ft. lbs (18 N.m) | ||||
| Starting | |||||
| Starter | STARTER SPECIFICATIONS | ||||
| Torque | TORQUE SPECIFICATIONS | ||||
| Wheel Alignment | |||||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||||
| Torque | TORQUE SPECIFICATIONS | ||||
| Wheel & Tire | |||||
| Wheel Lug Nut Torque | 76 Ft.lbs (103 N.m) | ||||