LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> ES 300 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Circuit Tests >> Input Signal Circuits >> Entering Diagnostic Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Entering Diagnostic Mode

  1. To enter diagnostic mode for switches, turn ignition on and go to next step. To enter diagnostic mode for vehicle speed sensor, raise and support vehicle. Start engine and place gear selector in Drive. Go to next step.
  2. While holding cruise control switch in SET/COAST or RES/ACC position, turn cruise main switch on (press button on end of lever). After a short pause (about 3 seconds), CRUISE indicator light should repeatedly flash 2 or 3 times. This indicates diagnostic mode has been entered. Release control switch lever to its normal (neutral) position. Check input signals. See CHECKING INPUT SIGNALS .
scientia non olet · About LEMON Manuals