Test No. 37: Stoplight Switch Circuit
NOTE:
If LEXUS scan tool is available, start test from step 1. If this scan tool is not available, start test from step 2.
- Using scan tool, check stoplight switch using DATA LIST. If stoplight switch is faulty, go to next step. If stoplight switch is okay, go to step 3.
- Check stoplight switch. See STOPLIGHT SWITCH under COMPONENT TESTS. Replace stoplight switch as necessary. Retest system operation. If stoplight switch is okay, go to next step.
- Check circuits for faults between stoplight switch, body control ECU No. 2 and battery. See WIRING DIAGRAMS . Repair or replace as necessary. If circuits are okay, perform TEST NO. 39: TRANSMISSION PATTERN SELECT SWITCH CIRCUIT .