Right Front Door
- Remove door lock control switch from front door. Connect ohmmeter between terminals No. 2 (Violet wire) and No. 3 (Green/Red wire) of door lock control switch connector (component side). See WIRING DIAGRAMS . With door lock control switch in lock position, continuity should exist. With door lock control switch in unlock position, continuity should not exist.
- Connect ohmmeter between terminals No. 2 (Violet wire) and No. 1 (Green/Black wire) of door lock control switch connector (component side). See WIRING DIAGRAMS . With door lock control switch in unlock position, continuity should exist. With door lock control switch in lock position, continuity should not exist. If continuity is not as specified, replace door lock control switch and retest system operation.