Park/Neutral Position (PNP) Switch Test
Disconnect Park/Neutral Position (PNP) switch connector. See COMPONENT LOCATIONS . Check for continuity between specified terminals of PNP switch. See PARK/NEUTRAL POSITION (PNP) SWITCH CONTINUITY SPECIFICATIONS table. See Fig 1. If continuity is not as specified, replace PNP switch.
PARK/NEUTRAL POSITION (PNP) SWITCH CONTINUITY SPECIFICATIONS
| Application & Gearshift Position | Continuity Between Terminals No. | |
|---|---|---|
| ES300 & RX300 | ||
| P | 2 & 7; 5 & 6 | |
| R | 2 & 8 | |
| N | 2 & 9; 5 & 6 | |
| D | 2 & 10 | |
| 2 | 2 & 3 | |
| L | 2 & 4 | |
| GS300 & GS400 | ||
| P | 4 & 7; 5 & 6 | |
| R | 4 & 8 | |
| N | 4 & 10; 5 & 6 | |
| D, 4 (Or M) | 4 & 9 | |
| 3 | 2 & 4 | |
| 2, L | 2 & 3 | |
| LS400 | ||
| P | 4 & 7; 5 & 6 | |
| R | 4 & 8 | |
| N | 4 & 10; 5 & 6 | |
| D, 4 | 4 & 9 | |
| 3 | 2 & 4 | |
| 2, L | 3 & 4 | |
| SC300 & SC400 | ||
| P | 4 & 7; 5 & 6 | |
| R | 4 & 8 | |
| N | 4 & 10; 5 & 6 | |
| D, 3 | 4 & 9 | |
| 2 | 2 & 4 | |
| L | 3 & 4 | |