Scan Tool Method
OBD-II DTCs from multiplex self-diagnostic system are retrieved through Data Link Connector (DLC) No. 3. DLC No. 3 is located under left side of instrument panel. Connect scan tool to DLC No. 3. Turn ignition on. See scan tool manufacturer's instructions. Retrieve DTCs. See MULTIPLEX DTC DEFINITIONS . If any DTCs are present, perform appropriate test. See DIAGNOSTIC TESTS .
MULTIPLEX DTC DEFINITIONS
| OBD-II DTC/2-Digit DTC (1) | Definition | ||
|---|---|---|---|
| B1213/13 | Tilt/Telescopic ECU Communication | ||
| B1215/15 | Door System Communication Bus Malfunction (Short Circuit) | ||
| B1272/72 | Power Seat ECU Communication | ||
| B1276/76 | Remote Control Mirror ECU Communication | ||
|
|||