Description & Operation
The remote keyless entry system allows the doors to be locked and unlocked by low-power electrical waves emitted from a hand-held transmitter. Pushing the transmitter UNLOCK button once will deactivate the theft deterrent system and unlock driver's door. Pushing the UNLOCK button again within 3 seconds will unlock the other doors and sound 2 chirps. Interior lights will also illuminate if interior light switch is in DOOR position. However, these functions do not operate if ignition switch is in ON position. If doors are not opened within 30 seconds, all the doors will automatically relock. See Fig 1.
Pushing the transmitter LOCK button once will lock all doors, sound one chirp and flash turn signals. If any door is not fully closed when LOCK button is pressed, door lock buzzer will sound for 10 seconds. To stop buzzer, ensure all doors are closed completely and push transmitter LOCK button again. If the transmitter PANIC button is pressed continuously for about one second, the panic alarm will sound. To stop panic alarm, push any transmitter button. However, this function does not operate if ignition switch is in ON position. To ensure doors are locked when walking away from vehicle, push transmitter LOCK button once again. If doors were already locked, turn signal lights will flash. The transmitter can also be used to operate windows and moon roof.
All remote keyless entry system functions can be programmed to fit customer needs (by dealer only).