Passenger's Switch
Remove passenger's switch. Using DVOM, check for continuity between specified terminals of passenger's switch. Ensure continuity is present between specified terminals for each switch position. See PASSENGER'S SWITCH CONTINUITY SPECIFICATIONS table. If continuity is not as specified, replace passenger's switch.
PASSENGER'S SWITCH CONTINUITY SPECIFICATIONS
| Switch Position | (1)Terminals No. | ||
|---|---|---|---|
| OFF (Neutral) | 1 & 2; 4 & 5 | ||
| UP | 1 & 2; 3 & 5 | ||
| DOWN | 1 & 3; 4 & 5 | ||
|
|||