LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> SC 300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul >> Performance Tests >> Hydraulic Pressure Tests >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hydraulic Pressure Tests: Notes

NOTE: Hydraulic pressure test should be performed with transmission fluid temperature of 122-176°F (50-80°C).
  1. Ensure transmission fluid is at normal operating temperature. Remove plug from right side of transmission case and install appropriate pressure gauge.
  2. Apply parking and service brakes. Start engine. Ensure idle speed is within manufacturer's specifications. Place transmission in "D" range.
  3. Check main line pressure at engine idle. Repeat procedure in "R" range. Compare all readings to specification. See LINE PRESSURE SPECIFICATIONS  table.
  4. Check main line pressure at full throttle (stall speed). Read highest pressure when engine reaches stall speed. Repeat procedure in "R" range. Compare all readings to specification. See LINE PRESSURE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals