LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> SC 300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul >> Performance Tests >> Torque Converter >> Stall Speed Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stall Speed Test Procedure

  1. Operate engine and transmission at normal operating temperature. Connect scan tool to DLC3 located under instrument panel. Apply parking brake and block front wheels.
    CAUTION: DO NOT maintain stall RPM for more than 5 seconds. Allow engine to idle for one minute between tests to allow fluid to cool.
  2. Start engine, apply brake pedal and place transmission in "D" position. Accelerate engine to full throttle and note maximum RPM obtained. Repeat test in "R" position. Compare reading obtained to specification. See STALL SPEED SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals