LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2000 >> SC 300 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Overhaul >> Performance Tests >> Torque Converter >> Stall Test Results
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stall Test Results

  1. If stall speed is the same for both ranges but lower than specification, engine output may be insufficient or stator one-way clutch may not be operating properly.
    NOTE: If stall RPM is more than 600 RPM less than specification, torque converter may be faulty.
  2. Stall speed exceeding specification in "D" range may be caused by a slipping forward clutch, defective No. 2 or overdrive one-way clutch or low main line pressure.
  3. Stall speeds exceeding specification in "R" range may be caused by a low main line pressure, direct clutch slipping, 1st and reverse brake slipping or overdrive one-way clutch defective.
  4. Stall speeds exceeding specification in both ranges may be caused by a low main line pressure, improper fluid level or overdrive one-way clutch defective.
STALL SPEED SPECIFICATIONS

Application Stall RPM
SC300 2550-2850
scientia non olet · About LEMON Manuals