Key Replacement Or Addition (Customer Supplied 2 Or More Valid Keys)
- Cut new transponder equipped key(s). Using 1st key, turn ignition to ON position, then to LOCK position 5 times. Turn 1st key to ON position. SECURITY light should illuminate. Turn 1st key to LOCK position. SECURITY light should go out.
- Using 2nd key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn 2nd key to LOCK position and remove key.
- Repeat step 2) with 1st key. Repeat step 2) with new key. Repeat step 2) with each new or valid key, up to 8 keys total. Wait 30 seconds, program will quit automatically.